My subwoofer build

Locked threads. Attitude problems. We don't delete them, they just get tossed here.
User avatar
bassman07
Posts: 589
Joined: Thu Jun 15, 2006 3:31 pm
Contact:

My subwoofer build

Postby bassman07 » Wed Nov 15, 2006 8:50 pm

I just recieved my parts from scott from fi car audio/resonant engineering. he sent me some parts because we are good buddies so i could build a 12 for a school project. The final x-max of the sub will be like 32 mm. it will have the bL equivalent to an mt. i hope yall like it!

this first picture is of me placing the dual voice coil/spider and cone together (without glue)
PM for box help!
User avatar
bassman07
Posts: 589
Joined: Thu Jun 15, 2006 3:31 pm
Contact:

Postby bassman07 » Wed Nov 15, 2006 8:52 pm

heres me placing the coil/spider/cone together
PM for box help!
User avatar
bassman07
Posts: 589
Joined: Thu Jun 15, 2006 3:31 pm
Contact:

Postby bassman07 » Wed Nov 15, 2006 8:55 pm

well pictures wont load lemme try something
PM for box help!
User avatar
bassman07
Posts: 589
Joined: Thu Jun 15, 2006 3:31 pm
Contact:

Postby bassman07 » Wed Nov 15, 2006 8:55 pm

ok got it to work now
You do not have the required permissions to view the files attached to this post.
PM for box help!
User avatar
bassman07
Posts: 589
Joined: Thu Jun 15, 2006 3:31 pm
Contact:

Postby bassman07 » Wed Nov 15, 2006 8:58 pm

now with soldering the tinsel leads onto the voicecoil outputs.
You do not have the required permissions to view the files attached to this post.
PM for box help!
User avatar
bassman07
Posts: 589
Joined: Thu Jun 15, 2006 3:31 pm
Contact:

Postby bassman07 » Wed Nov 15, 2006 9:40 pm

after soldered, i glued the tinsel leads to the spider, then i glued the cone on, then after that i glued the dustcap on and glued the nuts (excuse my french) holding my terminals on(for my own since of warranty).
You do not have the required permissions to view the files attached to this post.
PM for box help!
User avatar
bassman07
Posts: 589
Joined: Thu Jun 15, 2006 3:31 pm
Contact:

Postby bassman07 » Wed Nov 15, 2006 9:41 pm

later int he week comes motor application, glueing spider to cone. glueing surround to basket. then its up for sale! a 12" btl/mt
PM for box help!
User avatar
John
Posts: 8992
Joined: Thu Nov 06, 2003 1:00 pm
Contact:

Postby John » Thu Nov 16, 2006 12:40 am

Please upload them in the photo gallery as I can barely see those...Are you still looking for any more motor/baskets?
User avatar
TeamPSI
Posts: 972
Joined: Mon Aug 12, 2002 12:00 pm
Contact:

Postby TeamPSI » Thu Nov 16, 2006 2:05 am

Hey um... Scott doesnt work at RE. Maybe you should post this at his forum?
Word on the streets is that I should be worth about 100 grand. :greedy:

Return to “Dirty Laundry”

Who is online

Users browsing this forum: No registered users and 1 guest