SE for Corolla?GIVE ADVICE!

General car audio discussion area.
User avatar
nikoskostaras
New Member
Posts: 17
Joined: Wed May 14, 2008 4:17 am
Location: Greece

Postby nikoskostaras » Sun May 18, 2008 11:35 am

Why the Crunch amp isn't good?
User avatar
KU40
Posts: 6461
Joined: Sun Mar 16, 2003 12:02 pm
Location: Lawrence, KS
Contact:

Postby KU40 » Sun May 18, 2008 12:05 pm

it's cheap. they use lower quality parts and rate them for more power than they actually put out. it'll work though.
-Nick aka NS1 aka mopey aka speedbump
Alpine CDA-9827
Crossfire CFQ5.2
JL Audio XR 650csi components, Planet Audio TT2300
Crossfire VR404 on factory rear 6x8's until I get them upgraded
SI 15D2 + 3.8 @ 30 hz + Crossfire BMF 1000D = :)
User avatar
CATintheHAT
New Member
Posts: 83
Joined: Mon Feb 26, 2007 8:43 pm
Location: Twin Cities

Postby CATintheHAT » Mon May 19, 2008 5:34 pm

this is gonna be tough getting it all in the trunk. i would run 2 12's in the trunk or else just wall it off. besides it being so small, the corolla will be very easy to work with.
Hifonics
Audioque
Powermaster
User avatar
nikoskostaras
New Member
Posts: 17
Joined: Wed May 14, 2008 4:17 am
Location: Greece

Postby nikoskostaras » Wed May 21, 2008 11:42 am

Should I choose Crunch GTR2400 with 1200 WRms at 1 Ohm or Hifonics Brutus BXi MkII with 1100 WRms at 1 Ohm?
User avatar
KU40
Posts: 6461
Joined: Sun Mar 16, 2003 12:02 pm
Location: Lawrence, KS
Contact:

Postby KU40 » Wed May 21, 2008 11:54 am

well I just did some research and the new SEs are offered in either dual 2 ohm or dual 4 ohm. I was used to the older ones, which were all 4 ohm DVC. are yours dual 2 or 4?

your soundstorm puts out 1200 x 1 at 2 ohms, correct? If you have dual 2 ohm SE's you can keep that one. but if you have dual 4 ohm SE's you'll probably want to get the crunch to get more power and wire it at 1 ohm.
-Nick aka NS1 aka mopey aka speedbump

Alpine CDA-9827

Crossfire CFQ5.2

JL Audio XR 650csi components, Planet Audio TT2300

Crossfire VR404 on factory rear 6x8's until I get them upgraded

SI 15D2 + 3.8 @ 30 hz + Crossfire BMF 1000D = :)

Return to “Car Audio”

Who is online

Users browsing this forum: Google [Bot] and 1 guest