Page 1 of 1

BEst box for XXX 12"

Posted: Thu Aug 28, 2008 5:02 am
by tooloud
Hi, this is my first time i own a XXX. it's the 12" old version XXX. I need to build an enclosure for this sub, dont know if it's better to use a aeroport or a port.
Can anyone help me? First of all i can't find anywhere the specs, second i need a box not for SPL purposes but for big and deep bass!
My trunk can fit big boxes but i hope i wont need such a big enclosure. I hope around 2.5 cuft. Thanks to anyone.

Posted: Thu Aug 28, 2008 10:59 am
by KU40
an aeroport is a type of port. Whether you use regular PVC, an aeroport, or a slot port is up to you.

I'd make the box about as big as you can make it in the space you've allotted, tuned to 30-32 hz or so. 2.5 cube before displacement should yield you about 2.0 after port and sub displacement.

Posted: Thu Aug 28, 2008 11:38 am
by tooloud
I was wrong...i could build a box 3.8 cu.ft. Vented with a slot port. Anyone can help me to find the dimensions of the port? Box can be 26x14 (height) x18 (depth) inches, internal measures.
Tell me if im wrong. Need to tune it to 30รท35.

Posted: Thu Aug 28, 2008 5:49 pm
by KU40
For 2 cubes after all displacements, tuned to 32 hz, build using the dimensions you gave. That is actually only a 2.92 cube box because you didn't take out the wood when you figured your volume. Then make the opening to the slot port 12.5" tall (the height of the inside of your box) and 2.25" wide. Then make it 32" long.

It will have to be an L-shaped port. So make your first port board 14.25" long to go towards the back of the box, then the second piece 15" long to run along 2.25" from the back wall.

Posted: Fri Aug 29, 2008 9:43 am
by X-OvrDistortion
Can you do that in mm for me? Inches are srs bzns.

Posted: Fri Aug 29, 2008 10:13 am
by KU40
X-OvrDistortion wrote:Can you do that in mm for me? Inches are srs bzns.

Please multiply all numbers by 25.4 for mm measurements.

and whoops, I didn't realize you said internal measures when you gave those dimensions. Oh well, this box works. Just make them your outer dimensions, ha.

Posted: Fri Aug 29, 2008 11:15 am
by tooloud
Allright :-) what size of wood did you think about it?

Posted: Sat Aug 30, 2008 8:58 am
by KU40
3/4" MDF is pretty standard.

Posted: Mon Sep 01, 2008 2:26 pm
by tooloud
thanks!!! by the way, do you know if a RE Audio team exists?

Posted: Tue Sep 02, 2008 4:28 am
by emperorjj1
don't think so officially. ask usampsfreak