black00's new heartbeat

Work in progress? Car partially underway? If you want a spot to dedicate to the work this is where you'll want to go.
Post Reply
User avatar
black00
Posts: 7449
Joined: Mon Sep 25, 2000 12:00 pm
Location: Behind the trigger.

black00's new heartbeat

Postby black00 » Sun Apr 16, 2006 12:02 pm

ya ya.......
spent saturday building (alone as usual)
Double thick.....48w x 30h x Xdeep
One heavy son of a whore......
Will be sanded and rounded off and glazed before she goes in...
You do not have the required permissions to view the files attached to this post.
Top
User avatar
E`40
New Member
Posts: 1882
Joined: Wed Apr 05, 2000 11:00 pm
Location: Sidney, Ohio
Contact:
Contact E`40

Postby E`40 » Sun Apr 16, 2006 12:07 pm

Lookin good man....can't wait to see the finished product.....hopefully hear it at the picnic this year....
http://www.termpro.com/asp/competitorstats.asp?Competitor_ID=32722

Kinetik Power Cells
Ohio Generator
Hooker Audio
Powered By Maxxsonics
Team Baldman Creations
Top
User avatar
grassroots421
New Member
Posts: 424
Joined: Sat Oct 15, 2005 2:00 pm
Location: ATL

Postby grassroots421 » Sun Apr 16, 2006 12:44 pm

what's going in there? MT?
Premier P960mp | Autotek MM3000.1 @ .35ohm | MT 18 | YT Starter | HC2000 Secondary | ZX 650.4 | RS 6.5s front and rear
Top
User avatar
black00
Posts: 7449
Joined: Mon Sep 25, 2000 12:00 pm
Location: Behind the trigger.

Postby black00 » Sun Apr 16, 2006 9:05 pm

this was my design ;) i think i nailed it heheheh..
the angles at the top had me going kinda slow...
Your thickness turns into 3/4 thickness of your original thickness...so i couldn't adjust for it with the wood i had....that kinda sucked...but i'll be sanding that down to suit and then fiberglass resin on the inside...and taking all corners out..

belt sander gonna catch HELL tomorrow hehe...poor beltsander........hope it holds up....
Top
User avatar
black00
Posts: 7449
Joined: Mon Sep 25, 2000 12:00 pm
Location: Behind the trigger.

Postby black00 » Sun Apr 16, 2006 9:07 pm

grassroots421 wrote:what's going in there? MT?





:) i not gonna say yet.......

secret for the most part.......

I'll tell you....RE subs.... ;)

whatever is going in there is going to be assisted by dual 20.1s

Bassrace hell banger...das fo sho....
Top
User avatar
nismo
Posts: 6120
Joined: Tue Jan 16, 2001 1:00 pm
Location: Greenwood, IN
Contact:
Contact nismo

Postby nismo » Sun Apr 16, 2006 9:09 pm

I'm glad to see that box design I gave ya is werkin! :D

Eric
Top
User avatar
black00
Posts: 7449
Joined: Mon Sep 25, 2000 12:00 pm
Location: Behind the trigger.

Postby black00 » Sun Apr 16, 2006 9:12 pm

nismo wrote:I'm glad to see that box design I gave ya is werkin! :D

Eric




:cwm17: RIIIIIIIIIIIIIIIIIIIIIIIGHT........LOL :D pecker hhahahah
Top
User avatar
black00
Posts: 7449
Joined: Mon Sep 25, 2000 12:00 pm
Location: Behind the trigger.

Postby black00 » Sun Apr 16, 2006 9:14 pm

this was my plan.....
i think i nailed it...
;)

i'll sand it all off with belt sander tomorrow..and hope the belt sander don't tell me to go to hell LOL...

do my "treatment" to the inside...and then let it set for a few days... ;)
You do not have the required permissions to view the files attached to this post.
Top
User avatar
NDMstang65
Posts: 1410
Joined: Fri Sep 07, 2001 11:00 pm
Location: Radford,VA
Contact:
Contact NDMstang65

Postby NDMstang65 » Sun Apr 16, 2006 9:28 pm

i like i like

mad wang!
Top
User avatar
nismo
Posts: 6120
Joined: Tue Jan 16, 2001 1:00 pm
Location: Greenwood, IN
Contact:
Contact nismo

Postby nismo » Sun Apr 16, 2006 9:38 pm

black00 wrote::cwm17: RIIIIIIIIIIIIIIIIIIIIIIIGHT........LOL :D pecker hhahahah


[skee lo music] I got skeels *ba bump ba bump*[/skee lo]

Eric
Top
Post Reply

Return to “Project Logs”

Who is online

Users browsing this forum: No registered users and 1 guest